|
|
| ----Mills |
|
|
|
TRACE-O-MATIC HYDRAULIC PROFILING MILL WITH TRU TRACE AUTOMATIC CONTROL PATH 360/30 TRACER ATTACHMENT, MODEL TMR-72, 36” X 72” TABLE OVERALL SIZE |
MIL106 Request More Info |
KEARNEY & TRECKER VERTICAL MILL MODEL K#4, TABLE: 18” X 70”, MAX. RPM: 1300, 15 HP |
MIL108 Request More Info |
GORTON 3 DIMENSIONAL PANTOMILL MODEL P1-3, WORK SURFACE: 8 X 18,
LONGITUDINAL FEED: 6-1/2", CROSS FEED: 8", VERTICAL FEED KNEE:
10-1/2", VERTICAL FEED SPINDLE (2:1): 13/16, SPINDLE NOSE TO TABLE:
10-1/2", SPINDLE RPM:, 4,700 TO 18,000, SPINDLE CAPACITY: 5/16, HORSEPOWER:
¼, AREA COVERAGE, 2:1 RATIO, CIRCLE 5", RECTANGLE 3-1/2 X 6-1/4,
LONG STRIP 2-5/8 X 7, RATIOS 1:2 TO 1:16, TOOLING INCLUDING LETTERS, NUMBERS
COLLETS, EXCELLENT CONDITION |
CHARLES ROSS & SONS DISPERSING MILL 3 ROLL DESIGN, EXPLOSION PROOF, 2½" X 5" ROLLS, 120/240 VOLT 1 PHASE, EXCELLENT CONDITION
|
|
 MIL115 Request More Info |
BRIDGEPORT TRACER MILL 9" X 48" TABLE, 1 HP STEP-PULLEY HEAD, TRUE-TRACE B-360-3D, GOOD CONDITION |
 MIL116 Request More Info |
WINONA VAN NORMAN LINE BORING MACHINE MODEL 864370, MAX LENGTH OF BLOCK 80", MIN DISTANCE BED TO BAR CENTER LINE 16.9", MAX DISTANCE BED TO BAR CENTER LINE 29.9", BORING DIAMETER RANGE 1.1" TO 7", VARIABLE SPINDLE SPEED RPM 90-580, MAX SPINDLE TRAVEL 16.9" ELECTRIC MOTOR 2HP 230 VOLT 3 PHASE, EQUIPPED WITH: PARALLEL SET 3.9", PARALLEL SET 5.7" HEIGHT, PARALLEL SET 9" HEIGHT, STEADYREST, (2) TOOL BAR HOLDERS, BAR CENTERING SET, 1 BAR 6.5' LONG 2" DIAMETER |
 MIL117 Request More Info |
BRIDGEPORT SERIES II VERTICAL KNEE MILL 4 HP VARIABLE SPEED, 2 AXIS ANILIAN DIGITAL READOUT, POWER FEED IN ALL DIRECTIONS, POWER KNEE, NEW SERVO DRIVERS, VARIABLE SPEED HEAD, 11" X 58" TABLE, # 40 TAPER, 50 TO 3500 RPM, AUTO LUBE |
 MIL118 Request More Info |
BIRMINGHAM MILL MODEL BPS1649, STEP PULLY DRIVE, 9" X 42" TABLE, 220 VAC 3 PHASE, 2 HP |
